BAMBOO FLOORS CLEANING//BAMBOO FLOORS CLEANING : CLEANING VENETIAN BLINDS TIPS : CLEANED THE MEAN STREETS ACHIEVEMENT.
(Sun) SPRAY GUN CLEANING - SPRAY GUN


Spray gun cleaning - How to clean teeth with braces - Clean out tool



Spray Gun Cleaning





spray gun cleaning






    spray gun
  • A device resembling a gun that is used to spray a liquid such as paint or pesticide under pressure

  • an applicator resembling a gun for applying liquid substances (as paint) in the form of a spray

  • Spray painting is a painting technique where a device sprays a coating (paint, ink, varnish, etc.) through the air onto a surface. The most common types employ compressed gas—usually air—to atomize and direct the paint particles.

  • (Spray guns) An airbrush is a small, air-operated tool that sprays various media including ink and dye, but most often paint by a process of nebulization. Spray guns developed from the airbrush and are still considered a type of airbrush.





    cleaning
  • Make (something or someone) free of dirt, marks, or mess, esp. by washing, wiping, or brushing

  • (clean) free from dirt or impurities; or having clean habits; "children with clean shining faces"; "clean white shirts"; "clean dishes"; "a spotlessly clean house"; "cats are clean animals"

  • the act of making something clean; "he gave his shoes a good cleaning"

  • make clean by removing dirt, filth, or unwanted substances from; "Clean the stove!"; "The dentist cleaned my teeth"

  • Remove the innards of (fish or poultry) prior to cooking











spray gun cleaning - Tool Force




Tool Force A-C1 50 PSI 2-in-1 HVLP Spray Gun


Tool Force A-C1 50 PSI 2-in-1 HVLP Spray Gun



The Tool Force 50 psi 2-in-1 HVLP spray gun provides a better than 75-percent transfer efficiency with less than 10-percent psi output pressure. This spray gun features a 1.4-millimeter stainless nozzle for lighter materials and 2-millimeter stainless nozzle for heavier materials. It offers high atomization with low nozzle air pressure. The tool has a 1/4-inch air inlet and requires a 2-to-3 HP air compressor.50 psi 2-in-1 HVLP spray gun offers high atomization with low nozzle air pressureBetter than 75% transfer efficiency with less than 10% psi output pressure1.4-millimeter stainless nozzle for lighter materials; 2-millimeter stainless nozzle for heavier materials1/4-inch air inletRequires a 2 to 3 HP compressor (not included)

The Tool Force 50 psi 2-in-1 HVLP spray gun provides a better than 75-percent transfer efficiency with less than 10-percent psi output pressure. This spray gun features a 1.4-millimeter stainless nozzle for lighter materials and 2-millimeter stainless nozzle for heavier materials. It offers high atomization with low nozzle air pressure. The tool has a 1/4-inch air inlet and requires a 2-to-3 HP air compressor.










78% (18)





exercise your rights




exercise your rights





when i arrived in arizona, a coworker and i started discussing off-roading in all of the beautiful remote places the state had to offer. my coworker told me i needed 4 things:

1. a good pair of sunglasses
2. tinted windows
3. a wide-brimmed hat
4. a gun

i'd never even handled or fired a gun until i came to arizona. the idea of getting one both scared me and intrigued me. i'm not a "conservative" or a "republican" as those terms are used nowadays, but i've always believed in gun rights from a theoretical standpoint. it has always shocked me when i hear stories of mass shootings. i always wonder, why didn't any of those innocent bystanders have a gun? the answer isn't always "because it's illegal" (i.e. school campuses). most people have come to believe that it's acceptable to outsource our personal security to the police. i respect and admire the police. i have friends and relatives who are police officers. but realistically, the job of the police is to get there as soon as they can, clean up the mess, maybe do a little detective work, and every now and then, catch a bad guy (or girl).

"when seconds count, the police are minutes away." --bumper sticker

living in the "blue states" for so long might have had something to do with my inexperience with guns. the more-democratic "blue" states on the coasts are much less gun-friendly than the more-republican "red" states in the middle. our country has an important history with guns, and that's why it's written right into the constitution that our right to own guns "shall not be infringed". what's been happening over the past few decades, however, has been that gun rights have been infringed--er, "regulated"--more and more, bit by bit.

nevertheless, in many places out west, it's still perfectly legal to carry a gun on your hip, with no special permits or anything. to me, an easterner, this seems like an overtly political act. all the employees at the gun store (who are also the teachers of my gun classes) carry guns on their hips (at least when they are at work). they tell stories of being harassed by law enforcement and confronted by concerned strangers. one of my teachers said that if he's not allowed to carry a gun into an establishment, he stops visiting that establishment. places he's been kicked out of include the local mall and the county fair. he says he hasn't been to either in a decade. after hearing those stories, i realized that it is a very political act to carry a gun, especially openly, and i admire them for it.

the biggest hassle of carrying a gun is dealing with all the places you're not allowed to. it's absurd that a gun owner is not considered a threat outside the post office, but inside it she is (federal law). outside of lovin' spoonfuls (a delicious vegetarian restaurant that happens to serve alcohol) she is not a threat, but inside she is (state law--even if she does not drink while in the establishment). there are so many surprising and difficult-to-abide-by gun laws that almost every gun owner inadvertently violates one or two of them occasionally. this is one reason why people often prefer to carry concealed. if you have no way to be sure you're not violating a law without hiring a lawyer to follow you around everywhere, it's easier to avoid scrutiny by concealing your weapon. this can be done legally here, with a permit acquired after a couple classes in safety, shooting, and the legal issues involved with gun owership and concealed-carry.

the problem with concealed-carry is that criminals are not deterred by the sight of a gun on your hip, so you may be mugged even though you're carrying. then you have to decide what to do. that's a tough decision to make, and it's an even tougher one to execute properly if your plan involves actually pulling out your gun. usually, the best thing to do, carrying or not, is throw your money on the ground and run.

the advantage to concealed carry is you'll be harassed less by people who don't realize that guns are legal and safe when used correctly (or not used at all, which is usually the correct thing to do). it's often the police themselves that don't even realize it's legal for regular citizens to carry guns on their hips, since it happens so rarely (especially in states where permits are required and nearly impossible to obtain). the best thing about concealed-carry is that it has the potential to reduce crimes committed against everyone, even those who aren't carrying guns, since criminals cannot know who is and who isn't carrying.

the next thing to rant a bit about is the drug war. i've never used or sold drugs and never will. nevertheless, i think the drug war is absurd. one of the most frightening aspects of it is that police have abandoned the "knock and announce" procedure they used to follow when serving warrants. nowadays, if you're suspected of a drug crime, they will simply throw smal











alternative potato cannon projectiles




alternative potato cannon projectiles





Being a tightwad by nature, and also not wanting to waste good potatoes on wildlife that should go buy their own, I've used a variety of manufactured projectiles EXCLUSIVELY for my "potato" cannons for almost 15 years.

A favorite has to be the parachutes. Take a slug of plastic, a cap off a spray can, anything circular that will fit a bit loosely in the barrel of the spud gun. Drill a hole in the center big enough to thread a length of heavy twin through. Knot one end to keep it from pulling through, and tie the other end to the handles of a lightweight disposable bag from a grocery or other store. Load the thing bag first into the barrel all the way to the bottom, no big deal if the length of the twine lets the slug move around a bit. The heavier the slug of plastic, the louder the bang, the higher it goes, and more recoil is generated. I got this idea from some WWW site back in the 1990s, but the original concept was to drill a hole in a potato and use a handkerchief for the parachute. I didn't want to spend the money on handkerchief that might get lost or destroyed, or on potatoes for that matter. But I did have some scrap plastic cylinders at hand, and some heavy sisal gardening twine too - and like many people way too may flimsy shopping bags lying around even after cleaning up after the dog and taking out the garbage. The bag will start to shred after two or three shots, and will be converted to streamers after five or six. But hey, no big deal, just replace it with another if the thing falls too fast...

Another idea snagged from somebody's long-forgotten potato cannon WWW site: the red bottle caps came off plastic gallon (3.8 liter) milk jugs. They fit perfectly, with a slightly "tight" fit. into a nominal 1.5" diameter (3.8 cm) schedule 40 polyvinyl cloride ("PVC") barrel. Put the milk side of the cap towards the combustion chamber or pressure tank, depending on the type of potato cannon you have. With just a bottle cap, the cannon will produce a loud bang, and the cap will go an amazing distance - easily dozens of feet, and tend to get lost over the fence or on the roof. With a 4.5 foot (1.36 meter) long barrel, the cap will literally go out of sight with my combustion type potato cannon. BTW - only the caps from milk jugs seem to work - the similar caps from similar plastic containers for juice, bottled and distilled water, etc., are just a bit too big.

The depicted Nerf Pocket Vortex (names trademarked) fits perfectly into a nominal 2" (5.08 cm) diameter schedule 40 PVC barrel. Load the fins first, but make sure they don't go into the combustion chamber or beyond the bottom of the barrel. Note that I trimmed the fins a bit with scissors, so they didn't hit the sides of the barrel. This projectile will go an amazing distance, even farther with a strong wind to help it along. Be careful with this - it packs a wallop. Note the chunk taken out of the example above - that happened when it hit the side of the house from 25 feet (7.62 meter) away... I got this idea back in the mid-1990s. I was demonstrating my potato cannon to my then 8 year old nephew, and asked if I could try out his Vortex toy as a jest. To my surprise, he was game - and a lot of fun was generated. I've lost/destroyed several over the years, but the cost was insignifcant comapred to the use I got out of them.

Peach pits work quite well as projectiles in 1" (2.54 cm) dia. barrels. And the apple and pear trees always drop green fruit early in the season, which make great projectiles in their own right in the 1.5" and 2" barrels. A flimsy disposable grocery bag, wadded up and rammed into the base of the barrel, keeps the gree fruit from dropping into the combustion chamber.

As always, you are responsible for your own damages/injuries/deaths caused by your use of your own potato cannons.










spray gun cleaning








spray gun cleaning




Tool Force A-C2 HVLP Touch-Up Spray Gun






The Tool Force HVLP touch-up spray gun is ideal for covering small areas and touch-up work. It features a working pressure of 43-to-50 psi and an air consumption of five cubic feet per minute. The nozzle size is one millimeter, the cup capacity is 1/8 liters, and the air inlet is 1/4 inches. With HVLP this spray gun prevents over-spray, saving energy and material. It requires a 2 HP air compressor (sold separately). What's in the Box Brush, spanner, cup filter, and plastic cup.HVLP touch-up spray gun ideal for covering small areas and touch-up workWorking pressure of 43-to-50 psi; air consumption of 5 cubic feet per minuteHVLP prevents oversprayIncludes brush, spanner, cup filter, and plastic cup1 millimeter nozzle; 1/8-liter cup capacity; 1/4 inch air inlet

The Tool Force HVLP touch-up spray gun is ideal for covering small areas and touch-up work. It features a working pressure of 43-to-50 psi and an air consumption of five cubic feet per minute. The nozzle size is one millimeter, the cup capacity is 1/8 liters, and the air inlet is 1/4 inches. With HVLP this spray gun prevents over-spray, saving energy and material. It requires a 2 HP air compressor (sold separately).
What's in the Box
Brush, spanner, cup filter, and plastic cup.










Related topics:

grill cleaning brushes

gutter cleaning devices

clean eat recipes

ultrasonic gun cleaning solution

cleaning home office

keep your pc clean

how to clean microfiber couch

the cleaning place

earth clean up day

turkish rug cleaning



Category: None | trackback(0) | comment(0) |


<<SAME DAY DRY CLEANING SERVICE - DRY CLEANING SERVICE | TOP | VERY CLEAN PC : VERY CLEAN>>

comment











管理人のみ閲覧OK


trackback

trackback_url
http://bamboofloorscleajj.blog.fc2.com/tb.php/2-25c56754

| TOP |